Consider a regional firm with three locations, each with its own print vendor and reorder cycle, and a single navy that its designer chose on a calibrated monitor at headquarters. The navy looks right on every screen in the building. Then the third location reorders letterhead on uncoated stock, and the box arrives the color of wet slate. No one made an error that anyone could name. The palette was specified as screen values, and screen values do not survive the trip to paper unchanged.
The scenario is hypothetical, but the mechanics are not. A monitor builds color by adding light. A press builds it by laying ink on a surface that absorbs and scatters light, and the two gamuts overlap only in part. Saturated blues and some greens suffer most. Uncoated stock, which drinks ink, softens every value again, so a navy that reads as confident on glass comes off the press as something closer to gray. The shortfall belongs to the specification, which named a color the medium could not reproduce, and not to the printer who reproduced it faithfully.
The discovery arrives late for a plain reason. One location seldom prints enough to notice a drift, and the first real comparison occurs when a reorder from a second vendor lands beside the original. By then the stationery, the signage and the email header have each been approved by someone who saw a different color. Correcting the palette means reopening decisions that everyone assumed were closed. The inexpensive moment to settle it is before the color leaves the screen, when the question is which values have a printed equivalent and which need a substitute chosen on purpose.
Consider a franchise with eleven locations, each ordering its own stationery and signage. Head office approved the navy on a monitor and recorded it as a hex code. That code describes a mix of red, green and blue light. A screen emits light, so the navy looks deep and even. A press emits nothing. It lays down cyan, magenta, yellow and black ink and relies on the paper to reflect the result. The two systems do not share a range of reproducible colors, and a navy that glows on a display sits beyond what four process inks can reach on most stock.
Each vendor then converts the same hex value by its own method. One print shop applies a default conversion profile. Another matches by eye. A sign maker starts from the vinyl manufacturer’s swatch book, which bears no relation to the hex. The result is a set of eleven navies, none of them the one head office approved.
The paper matters as much as the ink. Uncoated stock absorbs ink into its fibers, so dots spread and the color reads duller, closer to slate. Coated stock holds ink on the surface and returns a sharper, more saturated result. Signage vinyl has its own base tone and finish: matte dulls a color, and gloss can shift it under store lighting. Monitor calibration adds a final variable. An uncalibrated display can show the same hex several shades away from its intended value, so the approver’s sense of “correct” was never a fixed reference.
The usual fix is a Pantone spot color. A spot ink is premixed to match a numbered swatch and printed as a single ink, which holds steady across runs and, when the printer follows the standard, across stock types. It costs more on some presses, and the printer must be told the number. A hex-to-CMYK conversion is a starting point, not a specification. A design system that records the logo color as a Pantone number, with a stock-specific CMYK value beside it, gives every vendor the same instruction. EEZYWEB’s brand governance does this for the company’s logo, colors and type, so that each site and print job draws on one definition. Before a large reorder, ask each vendor for a physical proof on the stock it will use.
A complete specification names one primary color and no more than three or four secondary colors. Each entry carries four values: a HEX code for web, an RGB triplet for digital tools, a CMYK breakdown for process printing, and a Pantone reference for spot inks. These values do not translate into one another. HEX and RGB describe light from a screen, while CMYK and Pantone describe ink on paper. The spec should therefore record where each value was proofed: coated or uncoated stock, a commercial press or a desktop printer, and the screen profile used for approval. A navy approved on coated sheet will not match the same navy on uncoated stock, and the spec should say which result the company accepted.
Type needs the same care. A web font license and a print license are separate instruments, and a font licensed for websites does not cover letterhead or signage unless the license says so. The spec should list each typeface with its license for each use, then give a fallback stack in order, such as the brand face, a close system face, and a generic family, so that a missing font degrades gracefully. It should also set minimum sizes: a print body size, a mobile body size, and the smallest permitted size for legal or fine print.
Contrast belongs in the spec as a measured requirement. WCAG 2.2 Level AA, published by the W3C, requires a contrast ratio of at least 4.5:1 for body text and 3:1 for large text. The spec should list the approved text-and-background pairings with their measured ratios, so that no one has to guess.
Tools such as Frontify, Brandfolder, Bynder and Canva Brand Kit can store these values, and an agency retainer or a shared folder can hold them too. The difference lies in enforcement. EEZYWEB defines the brand once and applies those values across sites and email, which keeps the screen version consistent. It does not, and no spec can, guarantee press output. Color varies with stock, press and ink, so a printed proof on the actual paper remains the real check.
A brand definition is only as useful as its application. EEZYWEB records a company’s logo, colors and type once, then applies that definition the same way on every website and email the company publishes. The definition lives in one place, so a location that builds a new page or sends a new campaign draws the same logo, color values and typefaces as the headquarters site. Drift usually enters through local edits rather than through design decisions, and a single source reduces the number of places where someone can make an adjustment that nobody else sees.
Consider a hypothetical franchise with three locations, each with its own web developer and its own email tool. Without a common definition, the navy on the second site may differ slightly from the navy on the first, and the third location may set its headings in a substitute typeface because the original file was never sent. A single definition does not prevent every error, but it gives each location the same reference, and it makes a discrepancy easy to identify.
Industry templates give new pages a starting structure that already reflects the brand. The client portal is where site edits and AI-assisted copy are made, so the people who maintain the sites work from the same definition rather than from a memory of it.
The boundary matters. EEZYWEB governs the digital application of a brand. It does not proof print, calibrate presses or choose paper. A navy specified for screens is a digital value, and its appearance on uncoated stock depends on the paper, the press and the printer’s color profile. Those decisions belong to the printer and the company. Before a reorder of stationery, a printed proof and a sample on the actual stock remain the only reliable checks.
Several alternatives address adjacent needs. Frontify, Brandfolder and Bynder are brand and digital asset platforms, and Canva Brand Kit suits smaller teams that want brand assets inside a design tool. An agency retainer buys judgment and hands-on work, and a folder of logo files holds assets without enforcing them. Each has a different cost and a different scope, and prices are published on each vendor’s site. The useful question is which of these keeps your definition consistent where your company actually publishes.
EEZYWEB costs $9 per month. That is the price, and it is the only recurring charge the product itself carries. The Get Started button begins a paid subscription, so the first month is a payment like any other.
The subscription does not cover the costs that usually decide a brand project. A designer’s hours to choose the navy, test it on the stock you actually print, and record the result vary with the scope of the work. A printer’s proof runs vary with the press, the paper and the number of revisions. Neither figure appears on our invoice, and neither should be borrowed from another company’s project. Price them separately, against the quantities you expect: the number of locations, the print orders a year, and how often the stationery changes.
The alternatives differ in what they bundle. A shared folder of logo files costs what your storage costs, but it enforces nothing; the color on a third location’s order is whatever the printer’s operator decided. An agency retainer includes design hours and someone to answer for the result, which suits a company that wants a named party accountable. Brand platforms such as Frontify, Brandfolder and Bynder, and Canva Brand Kit, are other routes. Each publishes its own pricing on its own site, and this section does not repeat those figures.
Compare the options on one basis. Ask what it costs to define the color and type once, what it costs to apply them on each site and in each print order, and who checks the proof before the press run. Request the answer to the second question in writing from every vendor, including us. Billing for the EEZYVERSE products a company uses arrives on one central bill at eezycloud.com/account/, which matters only if you hold more than one of them.
Consider a hypothetical dealer group with three locations and a logo that exists in four versions. The first week begins with inventory, not design. The office manager gathers every logo file, any existing brand guidelines, and the most recent stationery invoice, since the invoice records the paper the group actually buys.
On the second day, the team chooses one primary color and converts it. The conversion yields a CMYK value and the nearest Pantone match, and both numbers go into the same document. A monitor value alone is not enough. The team prints swatches of the color on the stock the group orders, uncoated sheets included, and sets them beside a current invoice. The swatches show whether the navy survives the move from screen to paper.
On the third day, the team checks body text for contrast against its background at the sizes used on the site and on the printed page. On the fourth day, it selects one web font and one print font and reads each license. A font licensed for desktop installation may not cover a website, and a web license may not cover a printed brochure.
By the end of the week, the spec is applied to one live page and one email template. The team reviews both on a phone, a laptop and a printed sheet. Only then does the group copy the spec to its other locations.
Tools differ in how they hold this work. A shared folder of logos stores files but enforces nothing. Frontify, Brandfolder and Bynder keep assets and guidelines in one place, and Canva Brand Kit covers common templates. An agency retainer supplies judgment at a standing cost. EEZYWEB defines a company’s logo, colors and type once and applies that definition across its sites, email and industry templates, with a client portal for later edits. Pricing is on the site. Support hours are Monday through Friday, 9 AM to 8 PM, and Saturday and Sunday, 9 AM to 12 PM Eastern, as published at eezycloud.com/support.
A shared folder of logos is the default. It carries no license fee, and its cost is the storage for which the company already pays. It governs files, not decisions. Whoever opens the folder chooses the swatch, the typeface and the export setting, so the navy on the third location’s stationery reflects whatever that person happened to select. The rules live in memory.
Brand and digital asset management platforms such as Frontify, Brandfolder and Bynder store approved assets, control who may download them and keep usage guidelines in one place. Their trade-off is operational. Someone inside the company must own the platform, maintain the library and train each location to use it. Whether that effort suits a small multi-site operator is a question for each vendor’s own materials, and pricing is on each vendor’s site.
Canva Brand Kit sits inside a design tool. It keeps colors, fonts and logos available to anyone designing in Canva, which suits a business that produces most of its material there. It governs that tool, not the websites or email the company runs elsewhere, and it leaves print-readiness checks to whoever prepares the file.
An agency retainer puts a person in charge. An experienced designer can test a navy on uncoated stock, adjust it and document the result, and that judgment often matters more than any software. The cost recurs each month, and the knowledge sits with the agency. If the relationship ends, the reasoning leaves with it unless the company required written standards.
EEZYWEB takes the design-systems approach. The logo, colors and type are defined once and applied the same way on every site and email, with industry templates and a client portal for site edits. It governs digital output most directly. A company still needs someone to approve a print proof before a reorder goes out, because no system can judge how a particular stock will take a particular ink.
A brand definition sits upstream of every tool that displays or prints the company’s marks. It records the navy, the type families, the weights and the spacing rules in one place, and every other surface draws from that record. The printer, the email tool, the website and the asset folder are all downstream. None of them should be the origin.
The definition itself needs more than a hex code. Each color should carry a screen value, a print value in the process or spot format the printer uses, and a note on the stock it was approved on. That last item is easy to omit, and it is the one that prevents the third location’s reorder from looking wrong. A navy approved on coated sheet will shift on uncoated letterhead, so the record should name the paper.
From there the flow runs in one direction. The printer receives the print values and a proof, not a color picked from a monitor. The email tool and the website receive the screen values and the type stack, so a button in a newsletter matches the site header. The asset folder holds the master logo files beside the definition document, so a new hire or a sign shop opens the same file the designer approved.
Tools differ in how much of this they hold. Frontify, Brandfolder and Bynder manage brand assets across teams, and each vendor sets its own pricing. Canva Brand Kit keeps colors and fonts inside one design tool. An agency retainer keeps the rules in the account manager’s head and in a few PDFs. A shared folder keeps the files but not the reasoning behind them. A company should know which of these it has, and whether its rules travel with its files.
EEZYWEB covers the design-systems and governance layer: a company defines its logo, colors and type once, and the same definition applies on every site and email. Each EEZY product belongs to the EEZYVERSE family, so one login covers the products a company uses, and each product is also sold on its own site. The central bill is at eezycloud.com/account/.
The practical point is this. Vendors change, and most companies change at least one within a few years. The brand file should outlast all of them: the approved values, the proof records, the stock notes and the master files, written plainly enough that someone outside the company can read them. Keep that file somewhere the company controls. Everything else in the stack is replaceable.
Screens mix light in RGB and presses mix ink in CMYK, so a color chosen on a monitor often shifts on paper. Specify each brand color in both values and test a printed proof first. EEZYWEB defines logo, colors and type once and applies them the same way on every site and email.
Choose families with a full range of weights, legible at small sizes, and a license that covers both web embedding and print. Use one face for headings and one for body text. EEZYWEB applies the type a company defines to its sites and email, so the choice is made once.
Most identities need a primary color, one or two accents, and neutrals for text and backgrounds. Each color needs one value for screen and one for print, and text contrast should be checked at small sizes. EEZYWEB keeps the palette in the brand definition, so each site and email draws on the same values.
Consistency usually fails when each site or sender adjusts the palette by hand. One brand definition, with governance over who may change it, prevents that drift. EEZYWEB provides design systems and brand governance, and its client portal lets site owners edit content within the approved brand. The plan is $9/month.
A shared folder stores logo files but does not govern their use. Brand platforms such as Bynder and Frontify manage assets under their own pricing and setup. EEZYWEB defines logo, colors and type once and applies them across sites and email, with industry templates. Compare terms on each vendor's site.
See how EEZYWEB defines a company's logo, colors and type once and applies them the same way on every site and email. The price is $9/month, and the details are on the site.
EEZYWEB is part of the EEZYVERSE family: one login, one bill, every EEZY product.
Choose which cookies you allow. Essential cookies are always active because they are required for the site to function.